Westfield 6mm/6mm 3m Driveaway Kit Driveaway Kit
- 2.00 KGS
- Calculated at Checkout
3m driveaway kit from Westfield offering the advantage of shorter fig 8 profiles. being made up of 4 x 750mm profiles rather than 3 x 1000mm. This allows you to store the driveaway kit in with your awning. As will all kits the kador is in 1 x 3m length.
This is a 6mm to 6mm kit which allows you to fully utilise the driveaway funtion of your driveaway awning. Used with standard awning rails, Reimo rails and some wind out canopies. If you have a wind out canopy it is worth checking the size you kit you require by using a 6mm and 4mm drill bit to see which size you require (Fiamma and some Omnistor Wind out canopies are generally 4mm)
Being a Westfield product the kits will state the kits are 7mm/5mm EU and 6mm/4mm UK this is the standard ref. used for driveaway kits. So kits by UK manufacturers state 6mm or 4mm. Kits made by European manufacturers state 7mm or 5mm. The reality is the kador is the same size allowing for some slight differences in manufacturing tolerances.
What the manufacturer says:-
A excellent quality universal drive away kit. The kit makes it easier to disconnect your awning from your van. It comes complete with a xm strip of double sided beading with 4mm beading on one side and 6mm beading on another, with x number of figure of eight tubing. The kit can be cut down to any size from its maximum length to suite your requirement. It is universal in application and can be used on motorhome awnings, caravan awnings or any awning that using awning channel and beading.
- High quality
- Easy to use
- Makes disconneting your awning easier
- Can be cut to any size
- Universal in use
Materials and Dimensions
- Beading: Double edged beading, 6mm on both sides
- Width of beading strip: 3.8 cm
- Length of beading strip: 300 cm
- Figure of eight: 4 pieces
- Length of figure of eight: 75 cm.
- Packed size: 75 x 10 x 7.5 cm
- Packed weight: 0.9 kg.