Awning Rail Channel Kit 3x 1.2m Strips 3.6m Total

Our Opinion:-

Handy kit to allow you to fit an awning rail to your vehicle. An awning rail allows you to attach a driveaway awning using a suitable 6mm/6mm driveaway kit or is useful to attach a simple canopy to your vehicle.

Supplied as 3 x 1.2 m length of Aluminium C rail. Complete with Self Adhesive backing and self tapping screws.

Can be cut to length to suit your vehicle. We would advise a single length awning rail is better but due to courier restrictions on length of parcels, it is hard to mail order. (We do stock Fiamma R rail in store which is just under 3m in length) If fitting a sectional awning rail try and get as close a fit between sections to ensure the Kador on your awning or driveaway kit can slide between the joins

What the manufacturer says:-

The Crusader Awning Rail Kit is ideal if you want to add an additional
awning rail, or to fit one to a motorhome or caravan which was not
fitted with one as standard.

The kit is supplied in three 120cm lengths, giving a maximum of 360cm of awning channel.

The rails are easy to cut to length, meaning it can be tailored to various
applications.

The totally waterproof seal between the rail and caravan
or motorhome prevents any water ingress into the dry area in the awning
from the awning / rail interface.

The kit comes complete with self adhesive tape to hold the rail in place whilst positioning and
screwing.

36 self tapping screws are supplied to fit the rail to the
side of the van.

Channel Diameter: 6mm

Width: 2.5cm

Sections: 3

Screws: Included